Carbon steel teeth hose Nipples With Teeth have precise sized, have better mechanical behavior and tightness, and are used for low-pressure liquid delivery, such as water, gas, and oil; they can also be used to make fences,greenhouse and other structures.
|
Product name: Carbon steel Hose Mender With Teeth Hose Nipples/KC nipples Nipple Fitting Teeth & taper Hose Nipples/Hose Adapter equal Teeth & taper Hose Nipples
Size: 15-150mm Standard: GB/T3091, BS1387, DIN EN10025, EN10219, JIS G3444:2004, ASTM A53, ASTM A53: GR. A , GR. B, etc. Steel grade: Q195, Q235, Q345, S235, S235JR, S355JR.STK400 /500.etc. Packing: Packed in bundles with several steel strips, Two tags on each bundle, Wrapped in waterproof paper
|
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. Usage: Used for low pressure liquid delivery, such as water, gas, and oil; it can also be used to make fence, greenhouse and other structures. Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Chrome coating,Copper coating,Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) End: Square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled
|
Two inner boxes then master seaworthy carton.
Custom LOGO is available
|
Standard |
Threads |
Surface |
Pipe type |
Size |
Pipe fittings length |
Thread length |
|
|
One end |
The other end |
Q195、Q235、20# |
1/8”-6” |
25PTmm-6000mm |
Standard or customized |
||
|
BSPT |
taper |
taper |
Hot dipped galvanized |
||||
|
NPT |
taper |
parallel |
Electro galvanized |
||||
|
DIN |
parallel |
parallel |
Black paint |
||||
|
GOST |
taper |
Teeth |
Chrome coating |
||||
|
EN |
Teeth |
No thread |
Copper coating |
||||
|
ISO |
taper |
No thread |
Plastics spray coating |
||||
|
|
Pipe nipples |
Steel sockets |
||||
|
Standard |
Size |
Pipe |
Threads |
Size |
Pipe |
Threads |
|
NPT |
ASTM A733 |
ASTM A53/A106 |
ANSI B1.20.1 |
ASTM A865 |
ASTM A120 |
ANSI B1.20.1 |
|
BSPT |
BS EN 10241 |
BS 1387/EN 1021 |
ISO 7/1 |
BS EN10241 |
BS 1387 |
ISO 7/1 |
|
DIN |
DIN 2982 |
DIN 2440/2441 |
DIN 2999 |
DIN 2986 |
DIN 2448 |
DIN 2999 |
1.Are you a manufacturer?
Yes, our factory was set up in 1990. Our company is integrated with industry and trade.
2.Acceptable payment methods?
We can accept T/T, L/C and etc.
3.How long will it take to deliver?
It takes generally 30-50 days.
4.What certification has your company passed?
Our company has passed the ISO9001:2005 system certification. And our products have passed UL and FM fire safety certification.
